How to make the construction of gabion mesh firm? These requirements must be followed!

Installation specifications and standards for gabion mesh:
1. Place the folded packaging gabion net on a flat and solid ground, unfold and flatten any excess creases.
2. Stand the front and rear panels, bottom plate, and partition vertically, and combine them into a regular box structure.
3. The upper and lower corners of adjacent cage groups are connected by double stranded composite wires; The upper and lower frame lines or fold lines should be firmly tied and tightened with spiral fixing wires.
4. Place multiple net cage units horizontally on flat ground and connect them to each other. If it is a multi-layer structure, the bottom frame of the upper net cage group should be tied and fixed with the surface frame or mesh of the lower net cage, and tightened with spiral fixing wires to form overall stability.
5. Fill the stone cage mesh evenly with stones to ensure that the stones are evenly distributed within the mesh.
6. It is advisable to use large stones for filling and fine stones for filling joints to ensure compactness; After filling, the minimum gap and maximum density should be achieved. The bulk density of the stone material should be ≥ 1.70t/m ³.
7. After the stone filling is completed, leveling spacers should be set between the gabion mesh surfaces to connect the units as a whole and overlap them according to the design requirements.
8. The installation of the mesh cover should be completed before placing and securing the partition.